Montare partitie linux

[Adrian Poputoaia]

Stie cineva cum fac activ md2?

root@rescue ~ # cat /proc/mdstat
Personalities : [raid1]
md2 : inactive sda3[0](S) sdc3[2](S) sdb3[1](S)
4376491200 blocks

md1 : active raid1 sda2[0] sdc2[2]
2104448 blocks [3/2] [U_U]

md0 : active raid1 sda1[0] sdc1[2]
4200896 blocks [3/2] [U_U]

Incerc sa il montez si nu reusesc, vreau sa recuperez niste date de pe el si am incerca toate variantele date de google (md0 e swap-ul iar md1 il monteaza fara probleme).
Vreo idee?

[rnicolescu]

#mdadm -R /dev/md2

[Adrian Poputoaia]

Am incerca si asta.

root@rescue /etc # mdadm -R /dev/md2
mdadm: failed to run array /dev/md2: Input/output error
root@rescue /etc # dmesg |tail
raid5: device sda3 operational as raid disk 0
raid5: device sdc3 operational as raid disk 2
raid5: allocated 3220kB for md2
raid5: cannot start dirty degraded array for md2
RAID5 conf printout:
--- rd:3 wd:2
disk 0, o:1, dev:sda3
disk 2, o:1, dev:sdc3
raid5: failed to run raid set md2
md: pers->run() failed ...

[Adrian Poputoaia]

Am rezolvat!
P.s revin mai tarziu sa zic cum!


Era stricat un hdd din RAID pe care nu il monta. Folositi comanda cu --force pentru montare fortata!
Toate cele bune!